Configuring SNMP & RMON Configuration Example
Configuration Guide
783
6
Configuration Example
6.1 Network Requirements
The following figure shows the network topology of a company. The company has
requirements as follows:
1) Monitor traffic flow of ports 1/0/1 and 1/0/2 on Switch A, and send notifications to the
NMS when the actual rate of transmitting and receiving packets exceeds the preset
threshold.
2) Monitor the sending status of ports 1/0/1 and 1/0/2 on Switch A, and regularly collect
and save data for follow-up checks. Specifically, during the sample interval, switch A
should notify the NMS when the number of packets transmitted and received on the
port exceeds the preset threshold; Switch A should record but not notify the NMS when
the number of packets transmitted and received is below the threshold.
The NMS host with IP address 192.168.1.222 is connected to the core switch, Switch B.
Switch A is connected to Switch B via port 1/0/3. And port 1/0/3 and the NMS are able to
reach one another.
Figure 6-1 Network Topology
Gi1/0/1
NMS
Switch B
Switch A
IP: 192.168.1.222
Gi1/0/2
Gi1/0/3
To Next Page
Loading...
