TP-Link T1500 Series - LLDP Configurations; Using the GUI; Configuring LLDP Globally

Configuration Guide 362
Configuring LLDP LLDP Configurations
2
LLDP Configurations
T configure LLDP function, follow the steps:
1) Configure the LLDP feature globally.
2) Configure the LLDP feature for the port.
2.1 Using the GUI
2.1.1 Configuring LLDP Globally
Choose the L2 FEATURES > LLDP > LLDP Config > Global Config to load the following
page.
Figure 2-1 Global Config