Configuration Guide 350
Configuring Spanning Tree Configuration Example for MSTP
Figure 5-13 Enable Spanning Tree Function on Ports
2) Choose the menu Spanning Tree > MSTP Instance > Region Config to load the
following page. Set the region name as 1 and the revision level as 100. Click Apply.
Figure 5-14 Configuring the Region
3) Choose the menu L2 FEATURES > Spanning Tree > MSTP Instance > Instance Config.
Click Add, map VLAN101-VLAN103 to instance 1 and set the priority as 32768; map
VLAN104-VLAN106 to instance 2 and set the priority as 0. Click Create.
Figure 5-15 Configuring the VLAN-Instance Mapping
4) Choose the menu L2 FEATURES > Spanning Tree > STP Instance > STP Config to load
the following page. Enable MSTP function globally, here we leave the values of the other
global parameters as default settings. Click Apply.
To Next Page
Loading...
