Configuration Guide 392
Configuring LLDP Configuration Example
PSE power enabled: No
PSE pairs control ability: No
Maximum frame size: 1518
LLDP-MED Capabilities: Capabilities
Network Policy
Location Identification
Extended Power via MDI - PSE
Inventory
Device Type: Network Connectivity
Application type: Reserved
Unknown policy: Yes
Tagged: No
VLAN ID: 0
Layer 2 Priority: 0
DSCP: 0
Location Data Format: Civic Address LCI
- What: Switch
- Country Code: CN
Power Type: PSE Device
Power Source: Primary
Power Priority: Low
Power Value: 30.0w
Hardware Revision: T15000-28PCT 3.0
Firmware Revision: Reserved
Software Revision: 3.0.0 Build 20180309 Rel.34341(s)
Serial Number: Reserved
Manufacturer Name: TP-Link
Model Name: T1500-28PCT 3.0
Asset ID: unknown
To Next Page
Loading...
