Configuration Guide 414
Configuring DHCP Service Example for DHCP VLAN Relay
Figure 4-5 Creating VLAN 20
Configuring DHCP VLAN Relay on the Relay Agent
1) Choose the menu L3 FEATURES > DHCP Service > DHCP Relay > DHCP Relay Config
to load the following page. In the Global Config section, enable DHCP Relay, and click
Apply.
Figure 4-6 Enable DHCP Relay
2) Choose the menu L3 FEATURES > DHCP Service > DHCP Relay > DHCP VLAN Relay
to load the following page. In the Default Relay Agent Interface section, specify
VLAN interface 1 (the default management VLAN interface ) as the default relay agent
interface.
To Next Page
Loading...
