Configuration Guide 640
Configuring IPv4 IMPB Configuration Examples
Figure 5-3 Binding Entry for User 2
3) Choose the menu SECURITY > IPv4 IMBP > ARP Detection > Global Config to load the
following page. Enable APP Detect, Validate Source MAC, Validate Destination MAC and
Validate IP, and click Apply. Select VLAN 1, change Status as Enabled and click Apply.
Figure 5-4 Enable ARP Detection
4) Choose the menu SECURITY > IPv4 IMBP > ARP Detection > Port Config to load the
following page. By default, all ports are enabled with ARP Detection and ARP flooding
defend. Configure port 1/0/3 as trusted port and keep other defend parameters as
default. Click Apply.
To Next Page
Loading...
