TR-Electronic MP-200 - References; Table 1: References

General information
 TR-Electronic GmbH 2016, All Rights Reserved Printed in the Federal Republic of Germany
Page 12 of 153 TR-EMO-BA-GB-0022 v03 09/29/2020
1.3 References
1.
EN 50325-4 Industrial Communication Systems, based on
ISO 11898 (CAN) for Controller Device Interfaces.
Part 4: CANopen
2.
ETG.1300 ETG specification “Indicator and Labeling”
3.
CiA DS-301 CANopen communication profile based on CAL
4.
CiA DSP-402, P1 – 5 CANopen Profile for drives
5.
IEC/PAS 62407 Real-time Ethernet control automation technology
(EtherCAT); International Electrotechnical Commission
6.
IEC 61158-1 - 6 Digital data communications for measurement and control
- Fieldbus for use in industrial control systems
- Protocols and Services, Type 12 = EtherCAT
7.
IEC 61784-2 Digital data communications for measurement and control
- Additional profiles for ISO/IEC 8802-3 based
communication networks in real-time applications, 12 = EtherCAT
8.
IEC 61800-7-200 Adjustable speed electrical power drives systems –
Profile specifications
9.
IEC 61800-7-201 Adjustable speed electrical power drives systems –
Profile type 1 specification
10.
ISO/IEC 8802-3 Carrier Sense Multiple Access with Collision Detection
(CSMA/CD)
Access Method and Physical Layer Specifications
11.
ISO 15745-4 AMD 2 Industrial automation systems and integration
- Open systems application integration framework
- Part 4: Reference description for Ethernet-based control systems;
Amendment 2:
Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink
12.
IEEE 1588-2002 IEEE Standard for a Precision Clock Synchronization
Protocol for Networked Measurement and Control Systems
Table 1: References