Trane TRACER SUMMIT BMTX-SVU01B-EN - Deleting a Block of Alarms or Events; Deleting the Entire Event Log

Handling Alarms and Events
138 BMTX-SVU01B-EN
Deleting a Block of Alarms or Events
1. With the appropriate event log tab displayed, click the first alarm or
event you want to delete (see Figure 127).
Figure 127. Deleting a Block of Alarms and Events
2. Press and hold down (do not release) the Shift key and click the last
alarm or event you want to delete. The entire block is highlighted.
3. Release the Shift key.
4. Press the Delete key to delete the highlighted block of alarms or
events.
Deleting the Entire Event Log
1. With the appropriate event log tab displayed, from the Edit menu
choose Select All (see Figure 128). All of the alarms or events in the
displayed event log are now highlighted.
Figure 128. Choosing Select All from the Edit Menu
Step 2
Step 1
Step 1