Handling Alarms and Events
120 BMTX-SVU01B-EN
Acknowledging an Alarm
Some of the alarms in the event log require operator attention, depending
on the type of alarm.
• If an alarm requires operator acknowledgment, the Ack Reqd column
on the event log displays Yes.
• If an alarm does not require acknowledgment, the column displays
“—”.
To acknowledge an alarm:
1. At the Event Log or BCU Event Log tab, click the line of the event log
that contains the alarm you want to acknowledge (see Figure 107).
Figure 107. Acknowledging an Alarm
2. Click the Acknowledge button. The following information replaces Yes
in the Ack Reqd column:
• Current date and time
• The user name of the operator currently logged on to Tracer
Summit
Note:
Use the terminal emulator to acknowledge Tracer 100 alarms.
tep 1
Step 2
Note:
After acknowledging an alarm, you should analyze the event
log for the cause of the alarm.
To Next Page
Loading...
