Trane TRACER SUMMIT BMTX-SVU01B-EN - Releasing Control Back to the System; Trane Objects; Non-Trane Bacnet Devices

Using the Simplified Override Dialog Box
BMTX-SVU01B-EN 71
To return control back to the BAS, see “Releasing Control Back to the Sys-
tem” on page 71.
Releasing Control Back to the System
To return control back to the BAS after performing an override, do the fol-
lowing:
Tra n e O b j e c ts
1. In the Simplified Override dialog box, click Auto in the
Auto/Manual knob.
2. Click OK to close the dialog box, or click Apply to view the updated
Present Value field and priority arrays.
Non-Trane BACnet devices
1. In the Simplified Override dialog box, click on the Release in the
Release/Change to knob.
2. Click OK to close the dialog box, or click Apply to view the updated
Present Value field and priority arrays.
Note:
Clicking on Auto to release control back to the BAS also
removes all user overrides from the priority array.