Trane TRACER SUMMIT BMTX-SVU01B-EN - Chapter 4 Logging on to and off of Tracer Summit; Logging on to Tracer Summit

BMTX-SVU01B-EN 29
Chapter 4
Logging On to and Off of
Tracer Summit
You must have a valid user name and password to log on to Tracer Sum-
mit. Contact your system supervisor if you have not been assigned a user
name and password.
IMPORTANT
To prevent unauthorized personnel from using Tracer Summit, you
should log off after completing your task(s).
Logging On to Tracer Summit
The Tracer Summit Log On window displays when you first open Tracer
Summit (see Figure 24).
Figure 24. Tracer Summit Log On Window
To log on to Tracer Summit:
1. In the User Name field, type your user name.
2. Press the Tab key to move the pointer to the Password field.
3. Type your password.
Note:
You may not have access to all of the tasks presented in this
guide. Your access privileges depend on your user profile. Con-
tact your supervisor for information.