Trane TRACER SUMMIT BMTX-SVU01B-EN - Adding Event Information to the Report

Changing Schedules
104 BMTX-SVU01B-EN
5. From the Available Schedules for Selected Period list, select the
schedules that you want to include in your report.
6. Click the Add button to add those schedules to the Selected Schedules
list.
7. Click the Finish button to create the time of day schedule report.
Adding event information to the report
Event information that you can add to the report is selected by default
(see Figure 93). If you don’t want to include an event on the report, click
on the checkbox to deselect it.
Figure 93. Scheduling information
Note:
To remove a schedule from the list click the Remove button.