Using the Trend Viewer
190 BMTX-SVU01B-EN
Historical Trends in the Audit Trail
Database
Historical trending is used to display data from the Audit Trail database
in a Trend Viewer. It is enabled in the Trend editor by checking the
Enable Historical Trending checkbox.
Viewing Historical Trends
1. From the Status menu, Select the Audit Trail Trend Viewer. The
Select Historical Trends dialog box displays (see Figure 24).
Figure 24. Select Historical Trends Dialog Box
Note:
Historical trending is only available if you are registered to use
either the Tracer Summit CCS or Enterprise packages. For
more information about historical trends, refer to the Tracer
Summit CCS System Programming guide.
Note:
You must be online to use the Audit Trail.
To Next Page
Loading...
