Using the Trend Viewer
186 BMTX-SVU01B-EN
Viewing the Legend
The legend represents members of a trend object. They are displayed in a
Trend Viewer chart as data markers.
1. Right-click on a member of the legend. The Settings dialog box dis-
plays (see Figure 21).
2. If desired, make changes using the checkboxes.
3. Click OK.
Changing the Legend Member Name
You can change the name of the legend member by using the Settings
Dialog box.
1. In the Display Name field, delete the current legend member name
(see Figure 21).
2. Type in a new legend member name.
3. Click OK.
Figure 21. The Settings Dialog Box
Note:
You can also hide or show the legend by selecting Hide/View
Legend from the Edit menu.
Note:
The Display Name field is disabled when the audit trail is used
on the system.
Tool Palette
Display Name field
To Next Page
Loading...
