Handling Alarms and Events
118 BMTX-SVU01B-EN
Closing the Event Log
When you close the event log, the following occurs:
• The event log (first tab) and error log (third tab) continue to update as
alarms, events, and errors occur. To see the most recent alarms and
events from the BCU event log (second tab), click the Go button.
• For high priority alarms, an audio alarm sounds and the Tracer Sum-
mit button flashes at the bottom of the screen (see Figure 95 on
page 107).
After closing the event log, you can display it again at any time by click-
ing the Alarms button on the task bar.
To close the event log:
◆ At any of the three event log tabs, click the Close button (see
Figure 105).
Figure 105. Closing the Event Log
Click to close the
event log
To Next Page
Loading...
