Closing a Site
BMTX-SVU01B-EN 41
Closing a Site
◆ From the Connect menu, select Close Site (see Figure 36). The site
closes.
If there is any information that you have not saved (for example, if you
created a report but did not save it), a message displays asking if you
want to save the information. You can do either of the following:
• To save information before closing a site, click Yes.
• To close a site without saving the information, click No.
Figure 36. Closing a Site
Help Information
In addition to this guide, you can get information on how to perform tasks
by displaying help information screens that correspond to your location in
the program. For example, when the scheduling screen is displayed, you
can display help information about the scheduling screen. This is called
context-sensitive help.
To display help information, do either of the following:
•
Press the F1 key on the keyboard (context sensitive help).
• Click the Help button (if one is available).
A typical help screen is shown in Figure 37 on page 42.
Note:
When you close a site, all communications to the site are
stopped, and all windows related to the site are closed.
To Next Page
Loading...
