Using Terminal Emulation and Keyboard Macros
46 BMTX-SVU01B-EN
To run macros from the navigation tree:
1. After connecting to a site, double-click the desired macro node in the
navigation tree (see Figure 40 on page 45).
If the site has several unit-to-unit panels defined for it, and you want
to run a macro in one of these other panels, double-click the site node
on the tree. Select the desired panel from the Select Remote dialog
box. Then double-click the macro again.
2. Click the desired macro item. The terminal emulation session runs
the keystroke macro that is assigned to the node.
To run macros from the terminal emulation window:
1. Right-click the mouse anywhere inside the terminal emulation win-
dow. The macro pop-up menu displays (see Figure 40 on page 45).
2. From the pop-up menu, select the desired macro. The Tracer Summit
software runs the macro.
Switching to Another Panel in the Site
Use the following procedure to switch to a different Tracer 100 panel
while you are already connected to a Tracer 100 panel. You can only
switch panels in a unit-to-unit site.
To switch to another panel:
1. From the Connect menu, select Select Remote. The Select Remote
dialog box appears.
2. Select the desired Tracer 100 panel to which you want to connect.
3. Click OK. The workstation disconnects from the currently connected
panel and connects to the newly selected panel. The Remote Unit
Name field displays the name of the connected panel.
Using Terminal Emulation Screen
Options
During a terminal emulation session, you can perform the following edit-
ing tasks:
• Save text to a file
• Output text to a printer
• Change the text and background colors
• Copy text to another application
To Next Page
Loading...
