Running Reports
148 BMTX-SVU01B-EN
Running a Standard Live Site Report
The site report is a standard live report that is not associated with a sin-
gle graphic but contains information about many objects or properties
throughout the entire site.
To Run a Site Report:
1. Click the Reports button on the task bar. The Select Report to View
window displays (see Figure 138).
Figure 138. Select Report to View Window
2. Make sure the Standard Live button is selected.
3. Click OK. The Select Standard Live Report window displays (see
Figure 139).
Figure 139. Select Standard Live Report Type List
4. If you are using a BCU panel, select Site Reports from the Standard
Report Type from the drop-down list. If you are using a Tracer 100
panel, Site Reports is your only option.
5. In the Report Name field, select the report name that you want to
run. Table 8 on page 149 describes the various reports.
Step 3
Step 2
Step 4
Step 5
To Next Page
Loading...
