1 Introduction
GCS900 grade control system. If your organization does not have a 3D machine control system, the
system provides site control, grade control, progress volumes, and stakeout capabilities to facilitate
earthmoving operations.
The field engineer can quantify progress, check data, and set out the information needed to keep
the machines moving. The SCS900 system tracks activities at each site and keeps a continuous
record of all results. Related data is stored, together, as a permanent construction record and is also
output as a TXT or DXF file. Back at the office, the software delivers comprehensive operation
analysis data.
Even if you have used other GNSS or GPS products before, Trimble recommends that you spend
some time reading this manual to learn about the special features of this product. If you are not
familiar with GNSS or GPS, visit the Trimble website (www.trimble.com).
Related information
Sources of related information include the following:
l
Release notes – The release notes describe new features of the product, information not
included in the manuals, and any changes to the manuals. They can be downloaded from the
Trimble website at www.trimble.com/construction/heavy-civil/site-positioning-
systems/scs900.aspx?dtID=support.
l
Trimble training courses – Consider a training course to help you use your GNSS system to its
fullest potential. For more information, go to the Trimble website at
www.trimble.com/training.html.
Technical support
If you have a problem and cannot find the information you need in the product documentation,
contact your local dealer. Alternatively, go to the Support area of the Trimble website
(www.trimble.com/support.shtml). Select the product you need information on. Product updates,
documentation, and any support issues are available for download.
If you need to contact Trimble technical support, complete the online inquiry form at
www.trimble.com/support_form.asp.
Trimble SCS900 Site Controller Software User Guide 10
To Next Page
Loading...
Need help?
General
