7 Volume and COGO
The results of the calculation are stored in the site report using the name of the volume
boundary.
Review & Edit Data
Use this feature to delete points you may have incorrectly measured. You can also use this feature
to calculate volumes of any surfaces that you have measured.
It also enables you to display contours of the surface, which serves as a quick check that you have
correctly collected data.
From the COGO menu, tap Review & Edit Data .
The Review and Edit Surface screen has a list of icons on the left side, which represents all the
available functions:
Icon Description
Compute Volumes
Create Line/Boundary
Delete Point/Line
Trimble SCS900 Site Controller Software User Guide 54
To Next Page
Loading...