Trimble SCS900 User Manual

3 Menus
The Total Station menu
The Total Station menu contains the control and system setup functions for total station operation.
Use this menu to connect the instrument and carry out total station setup to establish the position
and orientation of the instrument. The menu provides access to all total station control functions.
General functions include being able to enter and edit control point information, measure new
control points for the project, and recheck the system setup on a control point.
From the Home menu, tap Total Station.
The following commands are available from this menu:
Command Description
Connect to the total station using either a cable, Bluetooth® wireless
technology, or a radio for robotic operation.
Set up the total station and establish its position and orientation on the site
using the known point or arbitrary location (also known as free station or
resection) methods.
Set up for machine control.
Check an existing site calibration on a known control point.
Calibrate a total station.
Trimble SCS900 Site Controller Software User Guide 18

Trimble SCS900 Specifications

General

Brand	Trimble
Model	SCS900
Category	Controller
Language	English