5 Data Management
Creating and opening a work order in the field
From the Home menu, tap Site. After starting the software, you can select a site and work order to
start with:
For each of these options, you can either decide to open an existing site, design, and work order, or
create a new one. The New option opens a screen with a number of fields where you can define the
settings and add data files from a USB drive or from data already stored on the controller.
CAUTION – Before taking a measurement or associating a design with the site, ensure that the distance units are
correctly set. All files that relate to a single site must be stored and operated with the same units. Once a
measurement is taken, or a design is selected, you cannot change the units.
When creating a site on the controller, you can import or measure a site calibration or use a
published coordinate system from the coordinate system manager. After you select the Select
coordinate system option and tap Select coordinate system, the software will list all supported
coordinate systems.
Trimble SCS900 Site Controller Software User Guide 41
To Next Page
Loading...
Need help?
General
