Trio Motion Coordinator MC206 User Manual

6-14 System Setup and Diagnostics
Diagnostic Checklists
Trio Motion Technology
Axis losing position • encoder coupling
• encoder signal (wire length, differential/single
ended encoder)
• mechanics
Motion
Perfect cannot
“connect” with the control-
ler
• Controller running a program which transmits
on serial port 0. If this prevents Motion Perfect
connecting to the controller, open Terminal
screen in Motion Perfect unconnected mode
and type a “halt” command at the command
prompt.
• Faulty or unconnected serial cable
• Motion Perfect baudrate, data bits, parity or
stop bits have been changed. - Adjust to
default of 9600 baud, 7 data bits, 2 stop bits,
even parity under the “Options” menu.
• Check Motion Perfect version. The latest
version can be downloaded from
www.triomotion.com
Problem Potential reasons

Trio Motion Coordinator MC206 Specifications

General

Brand	Trio
Model	Motion Coordinator MC206
Category	Controller
Language	English