CFM-BL10Pro General instruction manual
50 / 87
WARNING
5.4.3. Saving data from PC software
While CFM is connected with PC via USB A-B type cable, all crimping data can
be saved on your PC via special PC software. The PC software can display
force curves, judgement result values and tolerance values in real time.
Maximum 9999 crimp data can be stored and saved as one data file.
Refer to “6. ProMaster Premium” regarding the how to use the PC software and
save the data.
Available USB memory
USB with a normal file format FAT32 and up to 64GB
can be used. We recommend using a USB from a
reliable manufacture. An inferior USB can be affected
on CFM operation and serious malfunction such as
frequent restarts might happen.
To Next Page
Loading...
