Configuring with Turck Safety Configurator and Rockwell Studio 5000
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
78
Assigning the Safety Network Number to the TBIP-Lx-FDIO1-2IOL
Open the "General" tab in the "module Properties and open the "Safety Network Number" win-
dow by pressing the "…" button.
Use the "Paste" button paste the controller's Sa
fety Network Number into the module configu-
ration and close the window with "OK".
Fig. 59: Copying the Safety Network Number to the module properties
To Next Page
Loading...
