VEMAG HP12E - Page 6

HP10E / HP12E / HP15E / HP20E - Dairy designIndex
iv © VEMAG 2013
8.8 Six-monthly maintenance 8-15
8.8.1 Feed unit seals 8-15
8.8.2 Vacuum pump 8-15
8.9 Annual maintenance 8-16
8.9.1 Feed unit drive and feed unit seals 8-16
8.9.2 Vacuum pump 8-16
8.10 Biennial maintenance 8-18
8.10.1 Double screw drive (oil change) 8-18
8.11 Three-yearly maintenance 8-19
8.11.1 Feed drive (oil change) 8-19
9. Troubleshooting 9-1
9.1 General information 9-1
9.2 Troubleshooting table 9-1
10. Appendix 10-1
10.1 General information 10-1
10.2 Technical data HP10E / HP12E / HP15E / HP20E 10-2
10.3 Dimensional drawings HP10E / HP12E / HP15E / HP20E 10-3
10.4 Lubricants 10-4
10.4.1 Double screw drive 10-4
10.4.2 Feed drive 10-4
10.4.3 Vacuum pump 10-4
10.4.4 Feed unit seals and feed unit drive 10-4
10.4.5 Individual parts 10-4
10.5 Accessories 10-5
10.5.1 Miscellaneous accessories 10-5
10.5.2 Tools 10-5
10.6 Disposal 10-6
10.6.1 General information 10-6
10.6.2 Proper disposal 10-6