VEMAG HP12E - Page 5

HP10E / HP12E / HP15E / HP20E - Dairy design Index
iii© VEMAG 2013
Working with the minced meat line and forming machine 6-48
6.6.4.43 Weight groups 6-48
6.6.4.44 Group position 6-48
6.6.4.45 Group portions 6-49
6.6.4.46 Group pause 6-49
6.6.4.47 Belt control (analog output 1) 6-50
6.6.4.48 Belt control (analog output 2) 6-50
Working with the scale 6-51
6.6.4.49 Number of samples (VEMAG Scale 877) 6-51
6.6.4.50 Sample interval (VEMAG Waage 877) 6-51
6.6.4.51 Tendency control (e.g. Process Check) 6-51
Working with special devices 6-52
6.6.4.52 Casing pusher 6-52
6.6.4.53 Pushback 6-52
6.6.4.54 Type of special control 6-53
6.6.4.55 Portion delay 6-53
6.6.4.56 Knife (cutter) 6-54
6.6.4.57 Maximum lling pressure (pressure monitoring
on grinding system) 6-54
6.6.4.58 Maximum temperature (temperature monitoring
for the grinding system) 6-55
6.6.4.59 Hopper mode 6-55
6.6.4.60 Hopper vacuum 6-56
6.6.4.61 Hopper level 6-56
6.6.4.62 Hopper level (optional) 6-57
6.6.4.63 Speed limit 6-58
6.6.4.64 External portioning 6-58
6.7 Congurations (operating mode settings) 6-61
6.8 Service 6-63
6.8.1 Service pages 6-63
6.9 Messages 6-64
6.9.1 List of messages 6-64
7. Cleaning 7-1
7.1 General information 7-1
7.2 Removing parts to be cleaned 7-1
7.2.1 Filling horn holder 7-1
7.2.2 Double screws 7-2
7.2.3 Double screw housing 7-2
7.2.4 Hopper 7-5
7.2.5 Scraper 7-8
7.2.6 Vacuum system 7-9
7.3 Cleaning the machine 7-11
7.4 Cleaning schedule 7-12
7.4.1 General recommendations 7-12
7.4.2 Chlorine-free alkaline cleaning agents 7-12
7.4.3 Chlorine-containing alkaline cleaning agents 7-14
7.4.4 Specialist cleaning agent for machine interior 7-15
7.5 Lubrication and assembly 7-16
7.5.1 Hopper 7-16
8. Maintenance 8-1
8.1 General information 8-1
8.2 Grease gun 8-5
8.3 First-time maintenance work 8-6
8.4 Maintenance schedule 8-7
8.5 Daily maintenance 8-8
8.5.1 Feed unit seals (lubrication) 8-8
8.5.2 Sliding ring (wear) 8-10
8.6 Weekly maintenance 8-11
8.6.1 Feed unit drive (lubrication) 8-11
8.6.2 Intake (air lter) 8-12
8.6.3 Vacuum pump (air lter) 8-13
8.6.4 Vacuum pump 8-13
8.7 Monthly maintenance 8-14
8.7.1 Double screw drive (oil level and seals) 8-14
8.7.2 Vacuum pump 8-14