VIDEOJET DataFlex 6530 - Page 84

8-4 Videojet DataFlex 6530 Service Manual - Rev AA
Troubleshooting
E1104 Invalid Job File
- invalid date
field
The Job file is invalid and needs to be corrected using 
CLARiSOFT. The Job file you are trying to select contains an
incorrectly specified Date Calculation. The Default Offset for
the date falls outside of the date range specified by the 
Minimum and Maximum user concession. Use CLARiSOFT
to correct this error in the Job file. Then, download the 
corrected file.
Press the Clear button, to clear this fault message.
E1105 Invalid Job File
- Multiple
Transmitted
Fields
The Job file is invalid and needs to be corrected using 
CLARiSOFT. A Transmitted Field attribute was found on
more than one field. Only one field can be tagged as the 
transmitted field. Use CLARiSOFT to correct this error in the
Job file. Then, download the corrected file to CLARiTY.
Press the Clear button, to clear this fault message.
E1200 Invalid Job File
- invalid 
barcode 
character
The Job file is invalid and needs to be corrected using 
CLARiSOFT. A barcode in the Job file contains characters
which are not in the character set of the barcode type being
used. Use CLARiSOFT to check and correct the barcode fields
in the Job file. Then, download the corrected file.
Press the Clear button to clear this fault message.
E1201 Invalid Job File
- invalid 
barcode check
digit
The Job file is invalid and needs to be corrected using 
CLARiSOFT. The check digit supplied for a barcode in the Job
file is invalid. Use CLARiSOFT to check and correct the bar-
code fields in the Job file. Then, download the corrected file.
Press the Clear button, to clear this fault message.
E1202 Invalid Job File
- EAN barcode
out of 
specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. An EAN barcode in the Job file contains more
than 48 characters, which is the maximum length for this type
of barcode. Use CLARiSOFT to check and correct the EAN
barcode fields in the Job file. Then, download the corrected
file.
Press the Clear button, to clear this fault message.
E1203 Invalid Job File
- EAN barcode
out of
specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. The field for an EAN128 barcode does not
contain enough data to form a valid Application Identifier.
Use CLARiSOFT to check and correct the EAN128 barcode
fields in the Job file. Then, download the corrected file.
Press the Clear button, to clear this fault message.
Error 
Reference
Name Remedial Action
Table 8-1: Faults and Warnings (Continued)