VIDEOJET DataFlex 6530 - Page 85

Videojet DataFlex 6530 Service Manual - Rev AA 8-5
Troubleshooting
E1204 Invalid Job File
- EAN barcode
out of
specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. An EAN128 barcode field contains an
application identifier containing non-numeric data, but
EAN128 application identifiers must be numeric. Use
CLARiSOFT to check and correct the EAN128 barcode fields
in the Job file. Then, download the corrected file.
Press the Clear button, to clear this fault message.
E1205 Invalid Job File
- EAN barcode
out of
specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. EAN128 barcode fields with an application
identifier of 23 should contain a length digit following the
application identifier. Use CLARiSOFT to check and correct
the EAN128 barcode fields in the Job file. Then, download the
corrected file.
Press the Clear button, to clear this fault message.
E1206 Invalid Job File
- EAN barcode
out of
specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. An EAN128 barcode field in the Job file does not
have the number of characters that are specified by its 
application identifier. Use CLARiSOFT to check and correct
the EAN128 barcode fields in the Job file. Then, download the 
corrected file.
Press the Clear button, to clear this fault message.
E1207 Invalid Job File
- EAN barcode
out of
specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. An EAN128 barcode field in the Job file contains
variable length data followed by a separator character; 
separator characters should not be used to terminate data in
an EAN128 barcode. Use CLARiSOFT to check and correct
the EAN128 barcode fields in the Job file. Then, download the 
corrected file.
Press the Clear button, to clear this fault message.
E1208 Invalid Job File
- EAN barcode
out of
specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. An EAN128 barcode field in the Job file contains
data that is out of range (e.g. an hour field set to 25 or a month
field set to 13). Use CLARiSOFT to check and correct the
EAN128 barcode fields in the Job file. Then, download the 
corrected file.
Press the Clear button, to clear this fault message.
E1209 Invalid Job File
- EAN barcode
out of
specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. An EAN128 barcode field in the Job file contains
an application identifier that requires a digit to specify the 
position of the decimal point, but this digit is not present. Use
CLARiSOFT to check and correct the EAN128 barcode fields
in the Job file. Then, download the corrected file.
Press the Clear button, to clear this fault message.
Error 
Reference
Name Remedial Action
Table 8-1: Faults and Warnings (Continued)