VIDEOJET DataFlex 6530 - Page 88

8-8 Videojet DataFlex 6530 Service Manual - Rev AA
Troubleshooting
E1226 Invalid Job File
- Invalid Price
The Job file contains a price field that is not supported by this
printer. Use CLARiSOFT to remove all price fields from the
job. Then, download the corrected file to the printer.
Press the Clear button, to clear this fault message.
E1227 Invalid Job File
- Invalid Trans-
mitted Field
The Job file contains a transmitted field that is not supported
by this printer. Use CLARiSOFT to disable the 'Transmitted
Field' option for all fields in the job. Then, download the 
corrected file to the printer.
Press the Clear button, to clear this fault message.
E1228 Invalid Job File
- Invalid
Graphic Field
The Job file contains a graphic field that is not supported by
this printer. Use CLARiSOFT to remove all Logo and 
Drawing fields in the job. Then, download the corrected file to
the printer.
Press the Clear button, to clear this fault message.
E1229 Invalid Job File
- Invalid
Graphic
The Job file contains a graphic field that is not supported by
this printer. Use CLARiSOFT to remove all Logo fields in the
job. Then, download the corrected file to the printer.
Press the Clear button, to clear this fault message.
E1230 Invalid Job File
- Invalid Draw-
ing
The Job file contains a Drawing field that is not supported by
this printer. Use CLARiSOFT to remove all Drawing fields in
the job. Then, download the corrected file to the printer.
Press the Clear button, to clear this fault message.
E1231 Invalid Job File
- Invalid
Paragraph
Field
The Job file contains a Paragraph field that is not supported
by this printer. Use CLARiSOFT to remove all Paragraph
fields in the job. Then, download the corrected file to the
printer.
Press the Clear button, to clear this fault message.
E1232 Invalid Job File
- PDF417
Barcode out of
Specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. A PDF417 or Micro-PDF417 barcode field in the
Job file contains more columns than the barcode symbology
supports. Use CLARiSOFT to check and correct the PDF417
and Micro-PDF417 barcode fields in the Job file. Then, 
download the corrected file.
Press the Clear button, to clear this fault message.
E1233 Invalid Job File
- PDF417
Barcode out of 
Specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. A PDF417 or Micro-PDF417 barcode field in the
Job file contains more rows than the barcode symbology 
supports. Use CLARiSOFT to check and correct the PDF417
and Micro-PDF417 barcode fields in the Job file. Then, 
download the corrected file.
Press the Clear button, to clear this fault message.
Error 
Reference
Name Remedial Action
Table 8-1: Faults and Warnings (Continued)