VIDEOJET DataFlex 6530 - Page 89

Videojet DataFlex 6530 Service Manual - Rev AA 8-9
Troubleshooting
E1234 Invalid Job File
- PDF417
Barcode out of
Specification
The Job file is invalid and needs to be corrected using 
CLARiSOFT. A PDF417 or Micro-PDF417 barcode field in the
Job file contains more characters than can be encoded with the
specified column and maximum row sizes. Use CLARiSOFT
to increase the number of columns or rows in the PDF417 and
Micro-PDF417 barcode fields in the Job file. Then, download
the corrected file.
Press the Clear button, to clear this fault message.
E1235 Invalid Job File
- EAN13 Price
Too Large
The Job file is invalid and needs to be corrected using 
CLARiSOFT. The EAN13 barcode contains a price that is too
large to be encoded within the barcode. Use CLARiSOFT to
check and correct the maximum price value for price field that
is referenced by the barcode.
Press the Clear button to clear this warning message.
E1236 Invalid Job File
- Invalid Font
The Job file contains a bitmap font field that is not supported
by this printer. Use CLARiSOFT to remove all bitmap font
fields in the job. Then, download the corrected file to the
printer.
Press the Clear button, to clear this warning message.
E1237 Invalid Job File
- Invalid Font
The Job file refers to a missing or invalid bitmap font file. Use
CLARiSOFT to check and ensure that all text fields used by
this Job file, display properly in CLARiSOFT. Then, 
download the corrected file to the printer.
Press the Clear button, to clear this warning message.
E1238 Invalid Job File
- Invalid
Global Count
Value
The Job file uses a global counter that is not compatible with
the current global count value. The current global count value
is either too long for the counter specified in the job or 
contains characters that are not valid. The global count value
will be reset when this job is selected. Use CLARiSOFT to
ensure that all jobs contain the same configuration for this
global counter.
Press the Clear button, to clear this warning message.
E1239 CLARiTY Data
File Complete
All data has been printed in the current CLARiTY Data File.
Please select a new Job to resume printing. Note you will have
to install a new CLARiTY Data file before selecting the Job if
that job uses a CLARiTY Data file.
Press the Clear button, to clear this fault message.
E1240 Missing
CLARiTY Data
File
There is no CLARiTY Data File installed in this printer and
the selected Job uses a CLARiTY Data file to lookup the data it
prints. Please select a new Job or install a CLARiTY Data file
to resume printing.
Press the Clear button, to clear this fault message.
Error 
Reference
Name Remedial Action
Table 8-1: Faults and Warnings (Continued)