Maintenance1132−2/A1
Winterthur Gas & Diesel Ltd.
12/ 15
11) Install the lifting tool 94116A (Fig. 18) to
the bearing shell (1).
12) Attach the spur-geared chain block
(H2) the middle of the lifting tool
94116A.
13) Use the spur-geared chain block (H2)
and the lifting tool 94116A to lift the
bearing shell (1).
14) Attach the machine room crane to the
lifting tool 94116A.
15) Remove the spur-geared chain block
(H2).
16) Use the machine room crane to move
the bearing shell (1) on to a wooden
underlay.
2015
Main Bearing Removal and Installation
1
94116A
Fig. 18
H2
94116A
WCH03015
To Next Page
Loading...
