WinGD X92 - Thrust Bearing Pads − Removal and Installation

Maintenance
1224−1/A1
Winterthur Gas & Diesel Ltd.
1/ 7
Thrust Bearing Pads − Removal and Installation
Tools:
1 Manual ratchet 94016−012 (H3) 1 Carrier 94155A
2 Spur geared chain block 2500 kg 94017−028 (H1) (H2) 1 Link 94321
1 Eye bolt 94045-M56
2 Shackle 94334A
1. Preparation
1) Read the data in 0012−1 General Guidelines for Lifting Tools.
2) Remove the end casing (1, Fig. 1).
3) Remove the beam (2).
4) Attach the shackles (94334A) and chain blocks (H1, H2) to the gallery.
5) Record the positions of each thrust bearing pad (thrust pad).
Fig. 1
1
2
WCH02906
H1, H2
Thrust Bearing
2015