WinGD X92 - Supply Unit; Camshaft and Bearing Shells − Removal and Installation; 5552−1;A1

Maintenance
5552−1/A1
Winterthur Gas & Diesel Ltd.
1/ 6
Camshaft and Bearing Shells − Removal and Installation
Tools:
2 Pre-tensioning jack 94557 1 Screwjack 94567B
3 Support 94566 1 Connection block 94934
1 Support 94566A 1 Pressure gauges 94934A
6 Roller lifting tool 94569B 3 HP hoses 94935
1 Assembly template 94567 1 Hydraulic unit 94942
1 Assembly template 94567A
1. Preparation 1.......................................................
2. Bearing Shells − Removal 3.........................................
3. Camshaft − Removal 4..............................................
4. Camshaft and Bearing Shells − Installation 4.........................
5. Completion 6.......................................................
1. Preparation
1) Remove the covers (2, Fig. 1) from the casing (3).
2) Remove the fuel pumps (1) refer to 5556−1, or as an alternative lift the rollers (see
step 3) to step 4).
Fig. 1
WCH02962
1
2
3
2015
Supply Unit