WinGD X92 - 2303−1;A1

Maintenance2303−1/A1
Winterthur Gas & Diesel Ltd.
2/ 10
2.2 Remove
1) Make sure that the piston rod gland (1) is in the correct position on the two hinged
covers (5, Fig. 1).
1) Remove the two O-rings (3).
2) Remove the four screws and nuts (4).
3) Push the two parts of the housing (2) away from the piston rod (1).
4) Remove the two parts of the housing (2).
Fig. 1
94350
WCH02943
1
4
2
WCH02943
2
5
WCH02943
3
2015
Remove, Disassemble, Measure Worn Parts, Assemble, Install