WinGD X92 - 1224−1;A1

Maintenance1224−1/A1
Winterthur Gas & Diesel Ltd.
2/ 7
2. Removal
1) Remove and discard the lockwire (4, Fig. 2) from the elastic bolts (3).
2) Remove the elastic bolts (3) and the sleeves (2).
3) Attach the eye bolt (9405−M56) to the arbor support (1).
4) Attach the chain block (H1) to the eye bolt (94045−M56).
5) Remove the arbor support (1).
6) Remove the eye bolt (94045-M12) from the arbor support.
7) Do step 1) to step 6) for the other arbor support (5).
3
4
H1
94045−M56
1
Fig. 2
2
5
WCH02906
2014
Thrust Bearing Pads − Removal and Installation