Maintenance
2751−1/A1
Winterthur Gas & Diesel Ltd.
1/ 4
Exhaust Valve − Removal and Installation
Tools:
2 Sling 94049A
1. Preparation
1) Drain the cylinder cooling water from the related cylinder (see 2708−1).
2) Close the air inlet to the air spring at the control air supply.
3) Remove the hydraulic pipe (4, Fig. 1) from the related exhaust valve, see 8460−1,
paragraph 1.
4) Disconnect the the pipe (3) from the air inlet to the air spring.
5) Disconnect the the pipe from oil supply to the valve guide.
6) Remove the round nuts (1), see the procedure given in 9403−4, paragraphs 1 and 2.
7) Disconnect the plug (2) of the valve stroke sensor.
2
Fig. 1
WCH02963
4
4
5
3
1
Exhaust Valve
2015
To Next Page
