Maintenance
Group2
Winterthur Gas & Diesel Ltd.
1/ 2
Cylinder Liner and Cylinder Cover Group 2
Cylinder Liner
Measuring Bore Wear 2124−1/A1................................................................
Removal and Installation 2124−2/A1..............................................................
Removal and Installation (with optional tool) 2124−2/A2.............................................
Removing the Wear Ridge, Re-dressing Lubricating Grooves
and Scavenge Ports 2124−3/A1.................................................................
Lubricating Quill: Removal and Installation 2138−1/A2...............................................
Piston Rod Gland: Remove, Disassemble, Measure Worn Parts, Assemble, Install 2303−1/A1...........
Cylinder Cover
Removal and Fitting of Cylinder Cover and Upper Water Guide Jacket 2708−1/A1......................
Machining of Sealing Face for Injection Valve 2708−3/A1............................................
Injection Valve: Replacement 2722−1/A1............................................................
Injection Valve:
Disassemble, Checks, Assemble (Injection Valve with FAST) 2722−2/A1.............
Starting Air Valve: Removal, Disassemble, Grinding, Assemble, Installation 2728−1/A1.................
Exhaust Valve
Exhaust Valve − Removal and Installation 2751−1/A1...............................................
Disassemble and Assemble 2751−2/A1...........................................................
Valve Seat − Replace / Grind 2751−3/A1..........................................................
Grinding the Seating Surface on the Valve Head 2751−4/A1.........................................
Winterthur Gas & Diesel Ltd. X92 / MM / 2017−11
To Next Page
