Maintenance
3301−1/A1
Winterthur Gas & Diesel Ltd.
1/ 1
Platforms
Tools:
2 Platform, each platform includes three grids 94142
2 Support 94143
1. General
You use the platform (94142, Fig. 1) and platform (94143) when you do work in the
crank area and between the columns. The platforms help to prevent accidents in
these areas.
You install the platform (94143) on the longitudinal beam (2) and the crank (1).
You install the platform (94142) at the applicable height on the steps (3) between the
columns. This support is adjustable between 725 mm and 902 mm
.
WARNING
Injury and Damage Hazard: Do not turn the crankshaft when the
platforms and/or supports are installed. This will cause injury to
personnel and damage to equipment.
3
Maximum Load 200 kg/m
2
94142
94143
Maximum Load
200 kg/m
2
WCH02921
FUEL SIDE
EXHAUST SIDE
1
2
Fig. 2: Platforms
2015
Crankcase
To Next Page
Loading...
