Maintenance
3206−1/A1
Winterthur Gas & Diesel Ltd.
1/ 2
Teeth check
1. General
Before you operate the turning gear (1, Fig. 1) you must do a check of the condition of
the tooth flanks on the pinion (2) and the flywheel (3). Also yu must make sure that
there is lubricant applied to these components.
For maintenance of the turning gear, refer to the instructions given in the supplier
documentation.
Fig. 1
I
1
2
3
I
WCH03012
2015
Turning Gear
To Next Page
Loading...
