wsm B2420 - Page 54

GENERAL
B2420, WSM
G-40
Clutch Center Tool (For B and L Series Tractors)
Application
• The clutch center tool can be used for all B and L series tractors
with a diaphragm clutch by changing tip guides. Center piece
diameter is 14 mm (0.55 in.).
WSM000001GEG0033US0
Relief Valve Pressure Tester
Code No.
• 07916-50045
Application
• This allows easy measurement of relief set pressure.
WSM000001GEG0027US0
Flow Meter
Code No.
• 07916-52791 (Flow Meter)
• 07916-52651 (Hydraulic Test Hose)
Application
• This allows easy testing of hydraulic system.
WSM000001GEG0036US0
Adaptor Set for Flow Meter
Code No.
• 07916-54031
Application
• Use for testing the hydraulic system.
WSM000001GEG0037US0
(1) Gauge (07916-50322)
(2) Cable (07916-50331)
(3) Threaded Joint (07916-50401)
(4) Threaded Joint (07916-50341)
(5) Adaptor B (M18 × P1.5)
(07916-50361)
(6) Adaptor C (PS3/8) (07916-50371)
(7) Adaptor D (PT1/8) (07916-50381)
(8) Adaptor E (PS3/8) (07916-50392)
(9) Adaptor F (PF1/2) (07916-62601)
(10) Adaptor 58 (PT1/4) (07916-52391)
(1) Flow Meter (2) Hydraulic Test Hose
(1) Adaptor 52
(2) Adaptor 53
(3) Adaptor 54
(4) Adaptor 61
(5) Adaptor 62
(6) Adaptor 63
(7) Adaptor 64
(8) Adaptor 65
(9) Adaptor 66
(10) Adaptor 67
(11) Adaptor 68
(12) Adaptor 69
(13) Hydraulic Adaptor 1
KiSC issued 06, 2012 A