ENGINE
B2420, WSM
1-S21
Draining Engine Oil
1. Place an oil pan underneath the engine.
2. To drain the used oil, remove the drain plug (1) at the bottom of
the engine and drain the oil completely.
3. Screw in the drain plug (1).
(When refilling)
• Fill with the new oil up to the upper notch on the dipstick.
• Never mix two different types of oil.
• Use the proper SAE Engine Oil according to ambient
temperatures.
• Refer to "LUBRICANTS, FUEL AND COOLANT". (See page
G-8.)
9Y1210436ENS0022US0
(1) Drain Plug
(2) Oil Inlet
(3) Dipstick
A: Oil level is acceptable within this
range.
To Next Page
Loading...
