For information about changing media, refer to Chapter 6, Machine Info, Media Status
and Setup .
1. Gently pull out the Media Drawer.
2. Lift and remove the Media Roll that needs to be replaced.
3. Pinch the Green Lever at the end of the Media Shaft in the direction of the Media
Size Label to release the roll from the shaft.
NOTE
Pinching the Green Lever releases the spring tension lock, making it possible for
you to remove the shaft from the core.
Xerox
®
6279
®
Wide Format Solution
1-28
Copy/Scan User Guide
Product Overview
To Next Page
Loading...
Need help?
General
