7. Return the Media Roll into the Shaft Guide with the paper’s lead edge feeding under
the roll and towards you.
8. Rotate the Media Roll until the lead edge of the paper is gripped in the Feed Roll
Area. The roll will feed and stop automatically.
9. Press the Media Advance button, corresponding to the Media Roll, and release it to
cut the lead edge and position the media into the feeder.
NOTE
If you wish to cut a longer length of the roll, press and hold the Media Advance
button.
Xerox
®
6279
®
Wide Format Solution
1-30
Copy/Scan User Guide
Product Overview
To Next Page
Loading...
