Xerox C315

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
TToonneerr ppaattcchh sseennssoorr sseettuupp
Print TPS information page
Print a diagnostic page that contains information on
toner patch sensor calibration.
AApppp CCoonnffiigguurraattiioonn
LES Applications
Off
On*
Enable the Xerox Embedded Solutions (LES)
applications.
• This menu item is available only in some printer
models.
• When set to On, this setting does not affect built-in
applications.
SSccaannnneerr CCoonnffiigguurraattiioonn
Scanner Manual Registration
Print Quick Test
Print a Quick Test target page.
Make sure that the margin spacing on the target page
is uniform all the way around the target. If it is not,
then the printer margins may need to be reset.
SSccaannnneerr CCoonnffiigguurraattiioonn
Scanner Manual Registration
Front ADF Registration
Rear ADF Registration
Flatbed Registration
Manually register the flatbed and ADF after replacing
the ADF, scanner glass, or controller board.
SSccaannnneerr CCoonnffiigguurraattiioonn
Edge Erase
Flatbed Edge Erase
0–6 (3*)
ADF Edge Erase
0–6 (3*)
Set the size, in millimeters, of the no-print area around
an ADF or flatbed scan job.
SSccaannnneerr CCoonnffiigguurraattiioonn
ADF Deskew
ADF Mechanical Deskew
Off
On
Auto*
Set the printer to perform ADF mechanical skew
adjustment.
SSccaannnneerr CCoonnffiigguurraattiioonn
Disabled Scanner
Enabled*
Disabled
Disable the scanner when it is not working properly.
158
Xerox
®
C315 Color Multifunction Printer User Guide
Use the Printer Menus