Setting up Card Copy
1. Open a web browser, then type the printer IP address in the address field.
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2. Click AAppppss > CCaarrdd CCooppyy > CCoonnffiigguurree.
• Make sure that Display Icon is enabled.
• Make sure that E-mail Settings and Network Share Settings are configured.
• When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and 400 dpi
for black and white.
• When scanning multiple cards, make sure that the scan resolution does not exceed 150 dpi for color and
300 dpi for black and white.
3. Apply the changes.
Note: You need a printer hard disk to scan multiple cards.
72
Xerox
®
C315 Color Multifunction Printer User Guide
Set up, Install, and Configure
To Next Page
Loading...
