Xerox C315

2. From the Print Quick Test menu, select SSttaarrtt.
3. Place the Print Quick Test page on the scanner glass, then select FFllaattbbeedd RReeggiissttrraattiioonn.
4. From the Copy Quick Test menu, select SSttaarrtt.
5. Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Left Margin and
Top Margin.
6. Repeat and until the margins of the Copy Quick Test page closely match the original document.
ADJUSTING ADF REGISTRATION
1. From the control panel, navigate to:
SSeettttiinnggss > DDeevviiccee > MMaaiinntteennaannccee > CCoonnffiigguurraattiioonn MMeennuu > SSccaannnneerr CCoonnffiigguurraattiioonn > SSccaannnneerr MMaannuuaall
RReeggiissttrraattiioonn
2. From the Print Quick Test menu, select SSttaarrtt.
3. Place the Print Quick Test page on the ADF tray.
4. Select FFrroonntt AADDFF RReeggiissttrraattiioonn or RReeaarr AADDFF RReeggiissttrraattiioonn.
• To align Front ADF Registration, place the test page faceup, short edge first into the ADF.
• To align Rear ADF Registration, place the test page facedown, short edge first into the ADF.
5. From the Copy Quick Test menu, select SSttaarrtt.
6. Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Horizontal
Adjust and Top Margin.
7. Repeat and until the margins of the Copy Quick Test page closely match the original document.
356
Xerox
®
C315 Color Multifunction Printer User Guide
Troubleshooting