the telephone port of the printer if you are connecting to a serial or cascaded telephone system.
Connecting the printer to a non-RJ11 wall jack
1. Connect one end of the telephone cable to the line port of the printer.
2. Connect the other end of the cable to the RJ11 adapter, then connect the adapter to the wall jack.
3. If you want to connect another device with a non-RJ11 connector to the same wall jack, then connect it
directly to the telephone adapter.
Connecting the printer to a wall jack in Germany
The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines.
The F port is for telephones. Connect the printer to any of the N ports.
Xerox
®
C315 Color Multifunction Printer User Guide 49
Set up, Install, and Configure
To Next Page
Loading...
