Xerox C315

1. Connect one end of the telephone cable to the line port of the printer.
2. Connect the other end of the cable to the RJ11 adapter, then connect the adapter to an N port.
3. If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as
shown.
CONNECTING TO A DISTINCTIVE RING SERVICE
A distinctive ring service lets you have multiple telephone numbers on one telephone line. Each telephone number is
assigned a different ring pattern.
1. From the control panel, navigate to:
SSeettttiinnggss > FFaaxx > FFaaxx SSeettuupp > FFaaxx RReecceeiivvee SSeettttiinnggss > AAddmmiinn CCoonnttrroollss > AAnnsswweerr OOnn
2. Select a ring pattern.
3. Apply the changes.
SETTING THE FAX DATE AND TIME
1. From the control panel, navigate to:
SSeettttiinnggss >> DDeevviiccee >> PPrreeffeerreenncceess >> DDaattee aanndd TTiimmee >> CCoonnffiigguurree
2. Configure the settings.
CONFIGURING DAYLIGHT SAVING TIME
1. From the control panel, navigate to:
SSeettttiinnggss >> DDeevviiccee >> PPrreeffeerreenncceess >> DDaattee aanndd TTiimmee >> CCoonnffiigguurree
For non-touch-screen printer models, to navigate through the settings, press OOKK.
2. From the Time Zone menu, select the required time zone.
3. Configure the settings.
CONFIGURING THE FAX SPEAKER SETTINGS
1. From the home screen, touch SSeettttiinnggss > FFaaxx > FFaaxx SSeettuupp > SSppeeaakkeerr SSeettttiinnggss.
2. Do the following:
• Set the Speaker Mode to AAllwwaayyss OOnn.
• Set the Speaker Volume to HHiigghh.
• Activate the Ringer Volume.
50
Xerox
®
C315 Color Multifunction Printer User Guide
Set up, Install, and Configure