Installing and updating software, drivers, and firmware
INSTALLING THE PRINTER SOFTWARE
• The print driver is included in the software installer package.
• For Macintosh computers with macOS version 10.7 or later, you do not need to install the driver to print on an
AirPrint-certified printer. If you want custom printing features, then download the print driver.
1. Obtain a copy of the software installer package.
• From the software CD that came with your printer.
• Go to www.xerox.com/drivers.
2. Run the installer, and then follow the instructions on the computer screen.
ADDING PRINTERS TO A COMPUTER
Before you begin, do one of the following:
• Connect the printer and the computer to the same network. For more information on connecting the printer to
a network, see Connecting the Printer to a Wi-Fi Network.
• Connect the computer to the printer. For more information, see Connecting a computer to the printer.
• Connect the printer to the computer using a USB cable. For more information, see Attaching Cables.
Note: The USB cable is sold separately.
For Windows users
1. From a computer, install the print driver.
Note: For more information, see Installing the printer software.
2. Open PPrriinntteerrss && ssccaannnneerrss, and then click AAdddd aa pprriinntteerr oorr ssccaannnneerr.
3. Depending on your printer connection, do one of the following:
• Select a printer from the list, and then click AAdddd ddeevviiccee.
• Click SShhooww WWii--FFii DDiirreecctt pprriinntteerrss, select a printer, and then click AAdddd ddeevviiccee.
Xerox
®
C315 Color Multifunction Printer User Guide 79
Set up, Install, and Configure
To Next Page
Loading...
